Patch pocket with flap

Patch pocket with flap without finishing stitch on the front

we prepare a marking of a pocket with allowances for details

duplicate the glue pocket, grind the lining to the grinding, iron the allowances = 1 cm at the inside of the pocket

we mark the pocket lining according to the markup

on the detail of the lining at a distance of slightly more than 1 cm from the edge, lay the line

iron the lining allowances

allowances are cut along the bending line of the grinder with the letter v

we embed the pocket, closing the lining

we sew a pocket secret to the part

we apply the valve according to the marking with the wrong side to the front of the coat, the valve looks down. stitch 0.5 cm from the edge

bend the valve up and grind it on the wrong side 0.7 cm from the edge.

coat